Combined anti stain humidity solvent based specialised treatment for internal and external use. Product suitable for polished and honed natural stone. Limestone,
Travertine, Slate, Marble and artificial conglomerate surfaces. Unique formula protection against humidity and surface moisture and general stains such as oil. Grease, Dirt, Food.
Platinum will not change the natural aspect of the stone.
DIRECTION FOR USE:
Stone surface must be clean and dry before application of treatment. Apply product uniformly by spray using garden pump up spray unit or with a lambs wool applicator or by cloth in circular movements. Most efficient method by spraying. In case of over treatment wipe up excess product with clean cloth.
DRYING FOR USE:
3/4 hours safe to walk on and 12/24 hours curing time before resuming normal use.
Use STONE CLEAN detergent and easy care SURFACE protection. Please call for advice.
COVERAGE PER LITRE:
Subject stone absorption: high 5-10 m2: medium 10-20 m2: low 20-30 m2.
C11-14 cyclic hydrocarbons isoalkanes ‹ 2% aromatics
H304 May be fatal if swallowed and enters airways.
EUH066 Repeated exposure may cause skin dryness or cracking.
P331 Do NOT induce vomiting.
P301+P310 IF SWALLOWED: Immediately call a POISON CENTER/Doctor/
product ready to use. Certain natural stones (marble. limestone) will remain sensitive to acidic etching.
We recommend any spillage be cleaned up immediately as a matter of good housekeeping. Do not apply to damp and dirty surfaces and where temperatures are below + 10°c. Before application a small discreet area should be tested to verify the suitability of the product on the stone to be treated.
Important that suitable ventilation is provided during and after in the area where the application is being carried out Do not eat or drink during the application of the product. Keep the product well closed and out of reach of children.