Easy care surface maintenance treatment for natural horned stone and terracotta. Matt Satin effect finish.
This special formulation creates an invisible protective barrier which prevents water, Oil, Grease, Coffee, Tea, Food, General Dirt, entering the surface making it easier to maintain.
Product will not change the natural aspect of the stone, allowing permeability vapour moisture to escape. Some natural stones (marble, limestone) will remain sensitive to acidic etching, we recommend any spillage be cleaned up as a matter of good housekeeping.
DIRECTION FOR USE:
Apply sparingly by cloth or spray on clean or damp surface and allowing to dry before applying second coat if necessary. We recommend allowing 30 minus between coats or testing that product is dry. Floor surface will be fully cured within 4/6 hours.
Important Safety Note: Use appropriate rubber gloves where necessary. Keep product well closed and out of the reach from children.
Before application a small discreet area should be tested to verify the suitability of the product on the stone to her treated.
Important that suitable ventilation is provided during and after in the are where the application is being carried out. Do not eat or drink during application of the product.
Keep the product well closed and out of reach of children.
Do not store with temperatures below +0ºC
– For consolidation 4/6 m2 using 1L
– Dense stone 8/12 m2 using 1L
– High porosity sandstone 3/6m2 – 8/12m2
– Medium porosity limestone 6/10m2 – 12/20m2
– Dense stone 15/20m2 – 25/30m2